1. Choose the Right Image

Download the official release image from GitHub Releases and verify its SHA256 checksum:

  • x86_64 (64-bit): Recommended for virtually all PCs, laptops, and servers manufactured since 2006 (supports both UEFI and Legacy BIOS).
  • i686 (32-bit): For legacy 32-bit CPUs and older BIOS-only hardware.

2. Flash ShredOS to a USB Drive

Linux (dd)

Identify your USB device with lsblk (e.g., /dev/sdX) and write the image directly:

sudo dd if=shredos-*.img of=/dev/sdX bs=4M status=progress conv=fsync

Windows (Rufus or balenaEtcher)

  1. Open Rufus or balenaEtcher.
  2. Select the downloaded shredos-*.img file.
  3. Select your target USB flash drive and click Start / Flash.

Ventoy (Multi-Boot USB)

ShredOS supports Ventoy out of the box. Copy the .img file directly onto your Ventoy data partition—no extraction or reflashing required. Note that when booted via Ventoy, PDF certificates and logs are saved inside /etc/nwipe in RAM rather than back to the Ventoy partition.


3. Booting & Keyboard Shortcuts

  1. Insert the USB drive and open your system’s boot menu (commonly F12, F11, F8, or ESC at power-on).
  2. Select the USB device. ShredOS boots into RAM and launches nwipe automatically.
  3. Use the arrow keys and Space in nwipe to select target drives, press M to choose your wipe method (or H for hardware-native sanitize), and press F10 to start.

Virtual Consoles (ALT + F1 through ALT + F5)

Shortcut Console / Utility
ALT + F1 Primary nwipe erasure interface
ALT + F2 Root shell (smartctl, hdparm, nvme-cli, lsblk, dmesg)
ALT + F3 System and kernel log output
ALT + F4 SmartDMT - Smart monitoring terminal
ALT + F5 shredos_hexviewer — interactive raw hexadecimal & ASCII sector inspector

4. Unattended / Automated Wiping (nwipe.conf)

When flashed directly to USB, ShredOS creates a FAT32 boot partition containing /boot/nwipe.conf and /etc/nwipe/. You can customize:

  • Automated wipes (autonuke): Configure nwipe to wipe all non-USB drives automatically on boot without keyboard interaction.
  • Custom PDF Branding: Replace /etc/nwipe/logo.jpg on the USB stick to include your organization’s logo on generated PDF erasure certificates.
  • Persistent Certificates: By default, PDF erasure certificates and logs are written directly to the FAT32 partition on your ShredOS USB drive as each drive finishes.